Holden Commodore Commodore Sedan IV (VF)

Holden - Commodore Sedan IV (VF)

Details-
BrandHolden
ModelCommodore
GenerationCommodore Sedan IV (VF)
Modification3.6 SIDI V6 (286 Hp) Flex Fuel
Start Of ProductionJune, 2013
End Of ProductionSeptember, 2014

Performance

The car specs indicate a drag coefficient (Cd) of 0.30, suggesting a relatively aerodynamic design. This value suggests good fuel efficiency and stability at high speeds.

Specs-
Rating
Drag Coefficient Cd0.30

Body & Dimensions

The car is a spacious sedan (Commodore model) with a length of 4966 mm (195.51 in) and width of 1898 mm (74.72 in). It has a comfortable height of 1471 mm (57.91 in) and a wheelbase of 2915 mm (114.76 in). The car can easily accommodate 5 people and has a minimum turning circle of 11.4 m (37.4 ft).

Specs-
Rating
Body TypeSedan
Seats5
Doors4
Length4966 mm 195.51 in.
Width1898 mm 74.72 in.
Width Including Mirrors2099 mm 82.64 in.
Height1471 mm 57.91 in.
Wheelbase2915 mm 114.76 in.
Front Track1592 mm 62.68 in.
Rear Track1608 mm 63.31 in.
Front Overhang890 mm 35.04 in.
Rear Overhang1160 mm 45.67 in.
Min Turning Circle11.4 m 37.4 ft.
Ride Height Ground Clearance137 mm 5.39 in.

Fuel Consumption

The car in question is a Commodore that runs on a combination of Petrol and Ethanol (E85). It complies with Euro 4 emission standards and has a combined fuel consumption of 9 l/100 km (26.13 US mpg, 31.39 UK mpg, 11.11 km/l). Its CO2 emissions are 215 g/km.

Specs-
Rating
Fuel TypePetrol / Ethanol - E85
Emission StandardEuro 4
Fuel Consumption Combined9 l/100 km 26.13 US mpg 31.39 UK mpg 11.11 km/l
Co2 Emissions215 g/km

Engine & Transmission

The car in question is a Commodore with a 6.0L V-engine, producing 286 HP and 350 Nm of torque. The engine is naturally aspirated, with direct fuel injection and a DOHC valvetrain. The car features a 6-speed manual transmission, driving the rear wheels. Both the front and rear suspensions are independent, with a MacPherson strut setup in the front and a multi-link setup in the rear. The engine has a capacity of 7L and uses 5W-30 / GM dexos1 oil.

Specs-
Rating
Powertrain ArchitectureInternal Combustion engine
Power286 Hp @ 6700 rpm.
Power Per Litre80.2 Hp/l
Torque350 Nm @ 2800 rpm. 258.15 lb.-ft. @ 2800 rpm.
Engine LayoutFront, Longitudinal
Engine Model CodeLFX
Engine Displacement3564 cm3 217.49 cu. in.
Number Of Cylinders6
Engine ConfigurationV-engine
Cylinder Bore94 mm 3.7 in.
Piston Stroke85.6 mm 3.37 in.
Compression Ratio11.5
Number Of Valves Per Cylinder4
Fuel Injection SystemDirect injection
Engine AspirationNaturally aspirated engine
ValvetrainDOHC
Engine Oil Capacity7 l 7.4 US qt | 6.16 UK qt
Engine Oil Specification5W-30 / GM dexos1
Coolant10.3 l 10.88 US qt | 9.06 UK qt
Drivetrain ArchitectureThe Internal combustion engine (ICE) drives the rear wheels of the vehicle.
Drive WheelRear wheel drive
Number Of Gears And Type Of Gearbox6 gears, manual transmission
Front SuspensionIndependent, type McPherson with coil spring and anti-roll bar
Rear SuspensionIndependent multi-link spring suspension with stabilizer

Brakes

The car in question is a Commodore, featuring ventilated disc brakes on both the front (298 mm) and rear (302 mm) wheels. The car is equipped with an ABS (Anti-lock braking system) and a steering rack and pinion system, paired with electric power steering. The tires are of size 245/45 R18, mounted on 8J x 18 wheel rims.

Specs-
Rating
Front BrakesVentilated discs, 298 mm
Rear BrakesVentilated discs, 302 mm
Assisting SystemsABS (Anti-lock braking system)
Steering TypeSteering rack and pinion
Power SteeringElectric Steering
Tires Size245/45 R18
Wheel Rims Size8J x 18

Weight & Capacity

The Commodore has a weight-to-power ratio of 5.9 kg/Hp (169.4 Hp/tonne) and a weight-to-torque ratio of 4.8 kg/Nm (207.3 Nm/tonne). It has a kerb weight of 1688 kg (3721.4 lbs.) and a maximum weight of 2168 kg (4779.62 lbs.), with a maximum load capacity of 480 kg (1058.22 lbs.). The trunk/boot space is at least 496 l (17.52 cu. ft.) and it has a fuel tank capacity of 71 l (18.76 US gal | 15.62 UK gal). The permitted trailer load with brakes (12%) is 1600 kg (3527.4 lbs.).

Specs-
Rating
Weight To Power Ratio5.9 kg/Hp, 169.4 Hp/tonne
Weight To Torque Ratio4.8 kg/Nm, 207.3 Nm/tonne
Kerb Weight1688 kg 3721.4 lbs.
Max Weight2168 kg 4779.62 lbs.
Max Load480 kg 1058.22 lbs.
Trunk Boot Space Minimum496 l 17.52 cu. ft.
Fuel Tank Capacity71 l 18.76 US gal | 15.62 UK gal
Permitted Trailer Load With Brakes 12 Percent1600 kg 3527.4 lbs.

Frequently Asked Questions

FAQs for Holden - Commodore Sedan IV (VF)

This car has 4 doors.

The ground clearance of this car is 137 mm (5.39 in).

The wheelbase of this car is 2915 mm (114.76 in).

A lower drag coefficient improves fuel efficiency and stability.

A lower drag coefficient allows for faster acceleration and better handling.

Other factors such as engine efficiency, weight, and aerodynamics of the vehicle also play a role in fuel efficiency.

The car uses a combination of Petrol and Ethanol (E85).

The car complies with Euro 4 emission standards.

The car has a combined fuel consumption of 9 l/100 km (26.13 US mpg, 31.39 UK mpg, 11.11 km/l).

The engine layout is front, longitudinal.

The car has a 6-speed manual transmission.

The engine displacement is 3564 cm3 (217.49 cu. in.).

The front brakes are ventilated discs, 298 mm in size.

The car has a steering rack and pinion system, with electric power steering.

The tires are 245/45 R18 in size.

The Commodore is powered by a 3.6L V6 engine with 235 horsepower.

The Commodore comes standard with features such as lane departure warning, adaptive cruise control, and a rearview camera.

The Commodore achieves an estimated 21 mpg city and 30 mpg highway.

The weight-to-power ratio of the Commodore is 5.9 kg/Hp (169.4 Hp/tonne).

The maximum load capacity of the Commodore is 480 kg (1058.22 lbs.).

The fuel tank capacity of the Commodore is 71 l (18.76 US gal | 15.62 UK gal).