The car specs indicate a drag coefficient (Cd) of 0.30, suggesting a moderate level of aerodynamic efficiency.
Specs
-
Drag Coefficient Cd
0.30
Body & Dimensions
The Commodore is a sedan with a length of 4966 mm, width of 1898 mm, and height of 1471 mm. It has a wheelbase of 2915 mm and a minimum turning circle of 11.4 meters. The car has a ride height ground clearance of 137 mm and a front track of 1592-1593 mm.
Specs
-
Rating
Body Type
Sedan
Seats
5
Doors
4
Length
4966 mm 195.51 in.
Width
1898 mm 74.72 in.
Width Including Mirrors
2099 mm 82.64 in.
Height
1471 mm 57.91 in.
Wheelbase
2915 mm 114.76 in.
Front Track
1592-1593 mm 62.68 - 62.72 in.
Rear Track
1590-1608 mm 62.6 - 63.31 in.
Front Overhang
890 mm 35.04 in.
Rear Overhang
1160 mm 45.67 in.
Min Turning Circle
11.4 m 37.4 ft.
Ride Height Ground Clearance
137 mm 5.39 in.
Fuel Consumption
The car in question is a Commodore that runs on petrol/gasoline and adheres to Euro 4 emission standards. Its combined fuel consumption ranges between 11.5-11.8 l/100 km (20.45 - 19.93 US mpg, 24.56 - 23.94 UK mpg, 8.7 - 8.47 km/l), with CO2 emissions of 274-278 g/km.
Specs
-
Rating
Fuel Type
Petrol (Gasoline)
Emission Standard
Euro 4
Fuel Consumption Combined
11.5-11.8 l/100 km 20.45 - 19.93 US mpg 24.56 - 23.94 UK mpg 8.7 - 8.47 km/l
Co2 Emissions
274-278 g/km
Engine & Transmission
The Holden Commodore is a high-performance sedan with a powerful 8-cylinder engine producing 367 horsepower and 530 Nm of torque. It features a 6-speed manual transmission and rear-wheel drive. The suspension system includes independent front and rear suspension with coil springs and stabilizers.
Specs
-
Rating
Powertrain Architecture
Internal Combustion engine
Power
367 Hp @ 5600 rpm.
Power Per Litre
61.5 Hp/l
Torque
530 Nm @ 4400 rpm. 390.91 lb.-ft. @ 4400 rpm.
Engine Layout
Front, Longitudinal
Engine Model Code
L77
Engine Displacement
5967 cm3 364.13 cu. in.
Number Of Cylinders
8
Engine Configuration
V-engine
Cylinder Bore
101.6 mm 4 in.
Piston Stroke
92 mm 3.62 in.
Compression Ratio
10.4
Number Of Valves Per Cylinder
2
Fuel Injection System
Multi-port manifold injection
Engine Aspiration
Naturally aspirated engine
Valvetrain
OHV
Engine Oil Capacity
7.6 l 8.03 US qt | 6.69 UK qt
Engine Oil Specification
5W-30 / GM dexos1
Coolant
10.2 l 10.78 US qt | 8.97 UK qt
Drivetrain Architecture
The Internal combustion engine (ICE) drives the rear wheels of the vehicle.
Drive Wheel
Rear wheel drive
Number Of Gears And Type Of Gearbox
6 gears, manual transmission
Front Suspension
Independent, type McPherson with coil spring and anti-roll bar
Rear Suspension
Independent multi-link spring suspension with stabilizer
Brakes
The Holden Commodore is a high-performance sedan with advanced braking systems, featuring ventilated discs on both the front and rear wheels, and an Anti-lock braking system for improved safety. It also features electric power steering and a range of tire sizes and wheel rim sizes to suit different driving conditions.
Front wheel rims: 8J x 18; 8.5J x 19 Rear wheel rims: 8J x 18; 8.5J x 19; 9J x 19
Weight & Capacity
The Commodore has a weight-to-power ratio of 4.7 kg/Hp (210.7 Hp/tonne) and a weight-to-torque ratio of 3.3 kg/Nm (304.2 Nm/tonne). It has a kerb weight of 1742-1777 kg (3840.45 - 3917.61 lbs.) and a maximum weight of 2222-2257 kg (4898.67 - 4975.83 lbs.). The car has a maximum load capacity of 480 kg (1058.22 lbs.) and a trunk/boot space of 496 l (17.52 cu. ft.). It has a fuel tank capacity of 71 l (18.76 US gal | 15.62 UK gal) and is permitted to tow a trailer weight of up to 1600 kg (3527.4 lbs.) with brakes.
Specs
-
Rating
Weight To Power Ratio
4.7 kg/Hp, 210.7 Hp/tonne
Weight To Torque Ratio
3.3 kg/Nm, 304.2 Nm/tonne
Kerb Weight
1742-1777 kg 3840.45 - 3917.61 lbs.
Max Weight
2222-2257 kg 4898.67 - 4975.83 lbs.
Max Load
480 kg 1058.22 lbs.
Trunk Boot Space Minimum
496 l 17.52 cu. ft.
Fuel Tank Capacity
71 l 18.76 US gal | 15.62 UK gal
Permitted Trailer Load With Brakes 12 Percent
1600 kg 3527.4 lbs.
Frequently Asked Questions
FAQs for Holden - Commodore Sedan IV (VF)
Sedan
4
2915 mm
A lower drag coefficient improves fuel efficiency and handling by reducing resistance to airflow.
A lower drag coefficient allows for slightly better acceleration and a slightly higher top speed.
Vehicle design, shape, and the presence of aerodynamic features like spoilers and diffusers all influence the drag coefficient.
This car uses petrol, also known as gasoline.
This car adheres to Euro 4 emission standards.
The car's combined fuel consumption ranges between 11.5-11.8 l/100 km (20.45 - 19.93 US mpg, 24.56 - 23.94 UK mpg, 8.7 - 8.47 km/l).
The engine displacement is 5967 cm3 or 364.13 cu. in.
The fuel injection system used is Multi-port manifold injection.
The transmission type is 6-speed manual.
The Holden Commodore features ventilated discs on both the front and rear wheels.
The Holden Commodore features electric power steering.
The Holden Commodore has a range of tire sizes and wheel rim sizes available, including front wheel tires: 245/45 R18; 245/40 R19, and rear wheel tires: 245/45 R18; 245/40 R19; 275/35 R19, and front wheel rims: 8J x 18; 8.5J x 19, and rear wheel rims: 8J x 18; 8.5J x 19; 9J x 19.
The Holden Commodore is a car model produced by Holden, an Australian subsidiary of General Motors.
No, the Holden Commodore ceased production in 2017.
The Holden Commodore is known for its performance, comfort, and reliability, making it a popular choice among Australian car enthusiasts.
The weight-to-power ratio of the Commodore is 4.7 kg/Hp (210.7 Hp/tonne).
The Commodore is permitted to tow a trailer weight of up to 1600 kg (3527.4 lbs.) with brakes.
The fuel tank capacity of the Commodore is 71 l (18.76 US gal | 15.62 UK gal).
