The Holden Commodore is a mid-size car that boasts a drag coefficient of 0.30, indicating its aerodynamic design helps reduce air resistance and improve fuel efficiency.
Specs
-
Rating
Drag Coefficient Cd
0.30
Body & Dimensions
The Commodore is a sedan with a length of 4966 mm, width of 1898 mm, and height of 1471 mm. It has a wheelbase of 2915 mm and a minimum turning circle of 11.4 meters. The car has a ride height ground clearance of 137 mm and a front track of 1592-1593 mm.
Specs
-
Rating
Body Type
Sedan
Seats
5
Doors
4
Length
4966 mm 195.51 in.
Width
1898 mm 74.72 in.
Width Including Mirrors
2099 mm 82.64 in.
Height
1471 mm 57.91 in.
Wheelbase
2915 mm 114.76 in.
Front Track
1592-1593 mm 62.68 - 62.72 in.
Rear Track
1590-1608 mm 62.6 - 63.31 in.
Front Overhang
890 mm 35.04 in.
Rear Overhang
1160 mm 45.67 in.
Min Turning Circle
11.4 m 37.4 ft.
Ride Height Ground Clearance
137 mm 5.39 in.
Fuel Consumption
The Holden Commodore is a car that runs on both petrol and ethanol (E85). It complies with Euro 4 emission standards and has a combined fuel consumption of 11.5-11.8 l/100 km, with CO2 emissions of 274-281 g/km. This gives it a rating of 3 out of 5.
Specs
-
Rating
Fuel Type
Petrol / Ethanol - E85
Emission Standard
Euro 4
Fuel Consumption Combined
11.5-11.8 l/100 km 20.45 - 19.93 US mpg 24.56 - 23.94 UK mpg 8.7 - 8.47 km/l
Co2 Emissions
274-281 g/km
Engine & Transmission
The car in question is a Commodore, equipped with a 367 horsepower, 5.3L V8 engine, which is naturally aspirated and uses a multi-port fuel injection system. It has an OHV valvetrain and a compression ratio of 10.4. The engine is longitudinally mounted and sends power to the rear wheels via a 6-speed manual transmission. The car features an independent suspension setup, both in the front and rear, with coil springs and an anti-roll bar in the front and a multi-link suspension in the rear. The car's cooling system has a capacity of 10.2 liters and the engine holds 7.6 liters of oil. The car uses 5W-30 / GM dexos1 oil.
Specs
-
Rating
Powertrain Architecture
Internal Combustion engine
Power
367 Hp @ 5600 rpm.
Power Per Litre
61.5 Hp/l
Torque
530 Nm @ 4400 rpm. 390.91 lb.-ft. @ 4400 rpm.
Engine Layout
Front, Longitudinal
Engine Model Code
L77
Engine Displacement
5967 cm3 364.13 cu. in.
Number Of Cylinders
8
Engine Configuration
V-engine
Cylinder Bore
101.6 mm 4 in.
Piston Stroke
92 mm 3.62 in.
Compression Ratio
10.4
Number Of Valves Per Cylinder
2
Fuel Injection System
Multi-port manifold injection
Engine Aspiration
Naturally aspirated engine
Valvetrain
OHV
Engine Oil Capacity
7.6 l 8.03 US qt | 6.69 UK qt
Engine Oil Specification
5W-30 / GM dexos1
Coolant
10.2 l 10.78 US qt | 8.97 UK qt
Drivetrain Architecture
The Internal combustion engine (ICE) drives the rear wheels of the vehicle.
Drive Wheel
Rear wheel drive
Number Of Gears And Type Of Gearbox
6 gears, manual transmission
Front Suspension
Independent, type McPherson with coil spring and anti-roll bar
Rear Suspension
Independent multi-link spring suspension with stabilizer
Brakes
The car specs showcase a well-equipped vehicle with impressive braking capabilities, aided by advanced safety features like ABS. The steering system is electric for enhanced maneuverability. The tire and rim combinations offer a balance of performance and comfort.
Front wheel rims: 8J x 18; 8.5J x 19 Rear wheel rims: 8J x 18; 8.5J x 19; 9J x 19
Weight & Capacity
The car boasts a strong power-to-weight ratio, indicating excellent acceleration and performance. Its weight-to-torque ratio is also impressive, suggesting ample low-end torque for effortless acceleration and climbing. The car offers a spacious trunk and ample cargo space, making it suitable for families or those who frequently transport cargo.
Specs
-
Weight To Power Ratio
4.7 kg/Hp, 212.3 Hp/tonne
Weight To Torque Ratio
3.3 kg/Nm, 306.5 Nm/tonne
Kerb Weight
1729-1766 kg 3811.79 - 3893.36 lbs.
Max Weight
2209-2246 kg 4870.01 - 4951.58 lbs.
Max Load
480 kg 1058.22 lbs.
Trunk Boot Space Minimum
496 l 17.52 cu. ft.
Fuel Tank Capacity
71 l 18.76 US gal | 15.62 UK gal
Permitted Trailer Load With Brakes 12 Percent
1600 kg 3527.4 lbs.
Frequently Asked Questions
FAQs for Holden - Commodore Sedan IV (VF)
Sedan
4
2915 mm
The drag coefficient of the Holden Commodore is 0.30.
Yes, the Holden Commodore's aerodynamic design helps reduce air resistance, which can improve fuel efficiency.
The Holden Commodore is a mid-size car.
The Holden Commodore uses both petrol and ethanol (E85) as fuel.
The Holden Commodore complies with Euro 4 emission standards.
The Holden Commodore has a combined fuel consumption of 11.5-11.8 l/100 km and CO2 emissions of 274-281 g/km.
The engine is longitudinally mounted.
It has a 6-speed manual transmission.
The compression ratio is 10.4.
The car features ventilated discs on both the front and rear axles for optimal stopping power.
The steering system is electrically powered for effortless and responsive handling.
The car offers a variety of tire and rim combinations, ranging from 245/45 R18 to 275/35 R19, providing options to suit different preferences and driving styles.
The engine capacity of the Holden Commodore varies depending on the trim level and model year. However, the most common engine capacities are 3.6L V6 and 6.0L V8.
Yes, the Holden Commodore is available with an automatic transmission option, in addition to a manual transmission.
Yes, the Holden Commodore is a rear-wheel drive car, which provides better handling and performance.
Fuel consumption information is not in the given specifications.
The specifications do not include information regarding towing capacity.
Feature information is not included in the given specifications.
